Startpagina Merken M-ZTannoy
|
 |
|
In uw winkelmandje: 0 Artikel, 0,00 EUR
|
 |
|
|
|
Get the big, deep low-frequency performance of an 200mm (8”) woofer with the same purity and articulation of the rest of the Reveal range with the R8D. Combining 180 Watts of bi-amplification, with Activ-Assist™ equalisation technology and an SPDIF digital input, the R8D is ready for the most demanding applications. Classic Reveal performance with extended LF response and up to 118dB of power output makes the R8D the new standard for world-class nearfield monitoring applications. |
 |
|
|
 |
PERFORMANCE 8D |
|
|
Frequency response (1) 46Hz-51kHz |
|
|
Max SPL (2) 118dB |
|
|
Distortion <0.4% |
|
|
Dispersion @-6dB, 10kHz, horizontal 90 degrees |
|
|
DRIVE UNITS |
|
|
Drive Units – LF/MID 200mm (8”) multi fibre |
|
|
paper pulp cone |
|
|
WideBandTM HF 25mm (1”) titanium dome, |
|
|
neodymium magnet system. |
|
|
ELECTRONIC SYSTEM |
|
|
Inputs 600 balanced XLR/Jack, |
|
|
SPDIF RCA |
|
|
SPDIF sampling rate 44.1 – 96kHz |
|
|
Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu |
|
|
for a max SPL of 118dB |
|
|
Amplifier output power 120W LF / 60W HF |
|
|
Outputs SPDIF slave out RCA |
|
|
User Controls Front panel mounted |
|
|
on/standby/mute switch, |
|
|
multi-function LED, |
|
|
Rear panel mounted trim +6/-12dB, |
|
|
80Hz high pass switch for AV use, |
|
|
16-way Activ-AssistTM switch array |
|
|
|
|
High power active near field reference monitor with Activ-Assist™ |
|
|
Optimised bass-reflex loaded cabinet with 40mm thick front baffle |
|
|
Shielded 200mm (8”) multi fibre paper pulp cone woofer |
|
|
Shielded 25mm (1”) titanium dome neodymium tweeter |
|
|
WideBandTM |
|
|
HF extended to 51kHz corrects phase response |
|
|
Active bi-amplification (120W LF / 60W HF) |
|
|
Tannoy Activ-Assist™ set-up software enabled |
|
|
| ContactImpressieOpeningstijdenVerzendkostenVoorwaarden |
|
|
|
