4 multi-input stereo channels: RIAA preamps for turntables on 3 inputs (channel 4 is Line/Line).

Soundcard output routing switches for each channel (1-2, 3-4, 5-6, 7-8).

3-Band total kill EQ: 6dB to off.

2 FX sends: pre/post selection (internal on FX2).

2 Stereo returns.

Headphone monitor met mix/cue control: 3.5 mm & 1/4" sockets

2 Analoge VCF filters low pass, ban pass, high pass (can be combines for more filter types), resonance frequency, and filter 'on' switch.

Filter assignable LFO with dept control and brand-new editable fader step-filter function.

Completely re-designed and functionally improved BPM detection circuit.

Mic input: on XLR connector; gain control and 2-band EQ control available: routable straight to soundcard.

Power supply: High performance internal switch mode supply.

RIAA: for THREE turntables (four via internal jumper link).

Dual Rail VCA Cross Fader.

Totally new 20-channel 96kHz/24-bit soundcard connecting ia wide-bandswitch USB 2.0 (480 Mbits).

Uses 24 bit Analogue to Digital converters and Digital to Analogue converters (not lower spec CODECs).

10 in / 10 out (4 stereo in optical in / 4 stereo out optical out).

No software configuration utility - all front panel switched.

Soundcard inputs fed from Mic, FX2, FX1, Main Mix or from channels 1-4.

Sends - mix, FX or individual analogue channels ay be routed to PC or digital outputs.

New record output - FX2 RCA outputs can be switched to a RCA record output.

Drivers available for PC and Mac.

NEW! 2 separate layers of MIDI controllers with control pickup algorithm, ensuring a smooth transition between layers.

227 MIDI control messages available from 105 separate MIDI controls.

8 x 60mm linear faders.

16 x dented rotary pots.

10 rotary encoders.

50 switches.

2 custom jog wheels with 4 micro switches.

8 illuminated push switches.

Xone:4D is compatible with any PC software that has MIDI assignable functions: for instance, lightning controller or visual effects programmes.